Registration Number Plate Fixers Spacer Pads 1mm Adhesive - 3 Pk

The Number Plate Fixers - 1mm Adhesive Spacer Pads are for direct surface mounting on flat surface only. Ensure you clean all wax and dirt from mounting surface and reverse side of number plate. Ensure the mounting surface is flat if not select 6mm spacer pad which will absorb minor surface differences. Apply three pads to the reverse side of plate in the positions shown on the back of packaging. Remove protective film from pads and press plate into position. Apply firm pressure for about ten seconds to ensure a good bond. Full bonding strength is reached after 24 hour and the minimum application temperature is 10c.

Specification:

• For direct surface mounting on flat surfaces only
  
• Clean all wax & dirt from fixing area
  
• Apply 3 pads in position to reverse of number plate & remove protective film
  
• Minimum application temperature is 10ºc
  
• Apply firm pressure for 10 seconds to ensure good bond, full bonding strength reached after 24 hours

Please Note: This product is bulk packed to bring you the best deal, no pretty packaging sorry!